基于衰变链计算的裂变产物缓发γ能谱分析

在军控核查技术中，缓发γ能谱是核材料的“指纹”。为计算和分析铀裂变产物的缓发γ能谱，本文将各种类型的衰变链简化为基态线性链和激发态线性链，推导了零时前后各级核素数目的变化公式，建构了计算缓发γ射线能谱的C语言程序代码，并通过实验对理论推导进行了验证。通过分析几种核素的缓发γ射线计数发现，计算结果与实验数据吻合较好。     

基于OpenFOAM的过冷流动沸腾数值模拟

过冷流动沸腾现象被广泛应用于工业生产和动力系统中，对该现象的准确预测是两相流CFD模拟的重要研究方向。本文详细阐述了该模拟过程中的欧拉两流体模型及相关辅助模型，基于开源CFD平台OpenFOAM，模拟了4.5 MPa下竖直圆管内的过冷流动沸腾，得到了截面空泡份额、液相平均温度及壁面温度沿轴向的分布。计算结果与实验值符合良好，说明了模型的有效性和程序的正确性。本文可为在OpenFOAM中添加新的模型及开发新的求解器以模拟过冷流动沸腾问题提供参考。     

Research on slag-resistance of ZrN-SiAlON-SiC-C composite refractory in different atmospheres

The ZrN-SiAlON composite powder was synthesized using low-grade zircon and bauxite by carbothermal reduction nitridation at first and then ZrN-SiAlON-SiC-C composite refractory were fabricated with the ZrN-SiAlON powder, SiC particles, and a small amount of Si powder as raw materials and sucrose as the binder. The slag resistance of these composites in O₂, N₂ and Ar atmosphere was investigated by X-ray diffraction, scanning electron microscopy, and energy dispersion spectra. The results show that the pores in the inside of ZrN-SiAlON-SiC-C composite refractory were enlarged in oxygen atmosphere due to oxidation, which leads to the decrease in slag resistance. In argon atmosphere, blast furnace slag destroyed the sintered body of zircon, corundum, and cristobalite with the formation of CaZrO₃, then infiltrated into and filled the pores inside the refractory to form a dense layer, which hindered the further erosion of the blast furnace slag. In the reducing atmosphere, the interfacial energy of the gas-liquid phases became larger due to the reactions between blast furnace slag liquid and the gas, resulting in a larger wetting angle which prevented the erosion.     

Neutron Diffraction and Neutron Radiography Investigation into Powder Sintering of Ti/Al and TiH2/Al Compacts

Metallurgical and Materials Transactions B - Sintering behaviors of two types of powder compact, i.e., Ti/Al and TiH2/Al, under vacuum were studied using in situ neutron diffraction, in situ...     

基于结构化遮挡编码和极限学习机的局部遮挡人脸识别

提出使用结构化遮挡编码（SOC）结合极限学习机（ELM）的算法来处理人脸识别中的遮挡问题。首先，使用SOC去除图像上的遮挡物，将遮挡物体与人脸分离开；同时，通过局部性约束字典（LCD）来估计遮挡物的位置，建立遮挡字典和人脸字典。然后，将建立好的人脸字典矩阵进行归一化处理，并利用ELM对归一化的数据进行分类识别。最后，在AR人脸库上进行的仿真实验结果表明，所提方法对不同遮挡物和不同区域遮挡的图像具有较好的识别率和鲁棒性。     

A Versatile Theranostic Nanoemulsion for Architecture‐Dependent Multimodal Imaging and Dually Augmented Photodynamic Therapy

To design a clinically translatable nanomedicine for photodynamic theranostics, the ingredients should be carefully considered. A high content of nanocarriers may cause extra toxicity in metabolism, and multiple theranostic agents would complicate the preparation process. These issues would be of less concern if the nanocarrier itself has most of the theranostic functions. In this work, a poly(ethylene glycol)‐boron dipyrromethene amphiphile (PEG‐F₅₄‐BODIPY) with 54 fluorine‐19 (¹⁹F) is synthesized and employed to emulsify perfluorohexane (PFH) into a theranostic nanoemulsion (PFH@PEG‐F₅₄‐BODIPY). The as‐prepared PFH@PEG‐F₅₄‐BODIPY can perform architecture‐dependent fluorescence/photoacoustic/¹⁹F magnetic resonance multimodal imaging, providing more information about the in vivo structure evolution of nanomedicine. Importantly, this nanoemulsion significantly enhances the therapeutic effect of BODIPY through both the high oxygen dissolving capability and less self‐quenching of BODIPY molecules. More interestingly, PFH@PEG‐F₅₄‐BODIPY shows high level of tumor accumulation and long tumor retention time, allowing a repeated light irradiation after a single‐dose intravenous injection. The “all‐in‐one” photodynamic theranostic nanoemulsion has simple composition, remarkable theranostic efficacy, and novel treatment pattern, and thus presents an intriguing avenue to developing clinically translatable theranostic agents.     

Q700D热影响粗晶区疲劳寿命与小裂纹扩展分析

摘要：为提高焊接构件的动载疲劳寿命，以热模拟为试验手段，对Q700D高强钢进行了焊接热模拟，研究了粗晶热影响区的疲劳寿命、小裂纹扩展行为以及组织软化特征。利用Paris方程和轴向拉伸疲劳试验数据，建立了ΔKth值与模拟粗晶区疲劳寿命的对应关系，利用ΔKth值实现了快速预估粗晶区疲劳寿命。研究表明：相同应力幅值下的lgN值与ΔKth值存在一定的线性拟合关系，即ΔKth值越大，则疲劳寿命N越长。小裂纹扩展微观机理在于所形成的大角度晶界（不小于15°）对小裂纹尖端的止裂性较强，可迫使小裂纹尖端转向耗能。CGHAZ的软化与第二相粒子回熔与粗化有关，粗化的第二相粒子易萌生小裂纹，可通过提高大角度晶界抑制裂纹扩展。     

Corrosion protection of aluminum alloy by epoxy coatings containing polyaniline modified graphene additives

In the study, polyaniline/reduced‐graphene oxide (PANI‐RGO) composites, fabricated by loading 2, 5, and 8wt% graphene oxide, was prepared by in‐situ emulsion polymerization and reduction. They are characterized by Fourier transform infrared spectroscopy, X‐ray diffraction, and scanning electron microscopy. Epoxy coatings adding PANI and PANI‐RGO composites were coated on the surface of AA5083 Al alloy. The anticorrosion performance of the coatings is measured by electrochemical impedance spectroscopy and potentiodynamic polarization curve in 3.5wt% NaCl solution. The results demonstrate that the epoxy/PANI‐RGO coating exhibits a better protection against AA5083 alloy corrosion compared with the epoxy/PANI coating. Enhancement of the passivation performance of PANI was obtained by the addition of RGO into epoxy/PANI coating system.     

基于证据权模型的赤峰—呼伦贝尔成矿带找矿预测

赤峰—呼伦贝尔成矿带是大兴安岭南部黄岗梁—甘珠尔庙成矿带的一部分，该区域地质构造复杂，地壳以及岩浆岩活动剧烈，在大兴安岭南部区域矿带中形成了多金属矿产成矿潜力。为寻求研究区找矿突破，解决赤峰—呼伦贝尔成矿带的成矿预测理论以及模型预测不完善的问题，提出了一种基于地理信息系统技术和数据权理论的赤峰—呼伦贝尔成矿带找矿预测模型。首先阐述了该预测模型的构建思路，利用地理信息系统空间分析软件（ArcGIS）对获取的研究区域地层信息、构造信息、岩浆岩信息进行空间分析，形成空间数据库；然后将证据权理论应用于预测模型中，构建了赤峰—呼伦贝尔成矿带成矿预测模型。根据构建的模型，进行了成矿预测，通过将空间数据库中的数据代入预测模型中得到该区域内各证据因子的权重以及概率，进而将该区域按照成矿潜力分成3类靶区。经验证，各靶区找矿潜力较好，证明了预测结果的有效性。所构建的成矿预测模型，对于进一步在赤峰—呼伦贝尔成矿带进行找矿勘探研究与实践具有一定的参考价值。     

激光立体成形TC4钛合金的热力场演化

激光立体成形能够实现高性能复杂零件的精确成形，但成形过程中的高温度梯度极易导致残余应力和变形，最终影响构件的几何精度和力学性能。通过搭建基板单边夹持原位热变形测量系统，探究了多道多层TC4钛合金成形件在激光立体成形过程中基板温度、变形的演化规律，分析了不同扫描策略对构件热应力场的影响。研究结果表明，构件的变形发展受其热历史驱使，扫描策略对成形件的热变形具有显著影响。